Tank reference

5 gallon

16 × 8 × 10 in

Key stats

Dimensions (L × W × H)

16 × 8 × 10 in

41 × 20 × 25 cm

Volume (raw, outside)

6 US gal

21.0 L · 1280 in³

Water volume (with glass inset)

4 US gal

16.8 L

Manufacturer nominal

5 gal

Differs from raw — manufacturer rounds down for shipping

Footprint

0.89 ft²

128 in²

Filled saltwater weight

71 lb

32 kg · 79 lb/ft² floor

Filled freshwater weight

79 lb

36 kg

Recommended glass (annealed)

4 mm

0.157 in · safety factor 3.8

Heater size (78°F target)

18 W

Redundant pair: 2× 25 W heaters

Substrate (2" sand bed)

13 lb

CaribSea Special Grade · 1 × 20-lb bags

How many gallons is a 16 × 8 × 10 in tank?

A 16 × 8 × 10 in aquarium contains 6 US gallons by outside dimensions. The math:

16 × 8 × 10 = 1280 in³
1280 ÷ 231 in³/gal = 5.54 US gal
5.54 × 3.785 = 21.0 L

In practice, actual water capacity is 4 gallons after subtracting 0.375" of glass thickness on each side. Manufacturers typically market this as a 5-gallon tank for round-number simplicity.

For a different shape (cylinder, hex, bow-front) or to enter custom dimensions, use the full aquarium volume calculator.

How much does a filled 16 × 8 × 10 in tank weigh?

  • Saltwater reef (with ~4 lb live rock + 1" sand bed): 71 lb (32 kg)
  • Freshwater (with 20 lb gravel, no rock): 79 lb (36 kg)
  • Empty glass only: approximately 20 lb
  • Floor load: 79 lb/ft² (saltwater filled)

Floor-load warning: at 79 lb/ft², this tank exceeds the 40 lb/ft² typical residential live-load rating. Place over a load-bearing wall or get a structural assessment before installing upstairs.

Full breakdown including equipment, sump, and custom rock weight: aquarium weight calculator.

Glass thickness for a 16 × 8 × 10 in tank

Using the Wisner hobby formula with a 3.8 safety factor, this tank requires:

  • Annealed (regular float) glass: 4 mm minimum (0.157")
  • Tempered glass: 4 mm minimum (tempered is ~4× stronger than annealed)

Most commercial tanks at this size ship one thickness step up for additional safety. See the glass thickness calculator for the full formula and Starphire (low-iron) options.

Heater wattage for a 16 × 8 × 10 in tank

In a warm room (~70 °F ambient) targeting 78 °F, this size tank needs about 18 W of heating. The conservative reefkeeping practice is to run two heaters at 25 W each: if one fails stuck-on, the other isn't powerful enough to cook the tank alone; if one fails stuck-off, the remaining one slows the temperature drop while you replace it.

For cold-room or cool-basement adjustments: heater wattage calculator.

How much sand or gravel for a 16 × 8 × 10 in tank?

  • 2" sand bed: ~13 lb of CaribSea Special Grade aragonite (1 × 20-lb bags)
  • 4" deep sand bed (DSB): ~25 lb
  • 1" shallow / aesthetic: ~6 lb

Other substrate brands (Nature's Ocean, Tahitian Moon, Eco-Complete): substrate calculator.

Ad slot · Article inline

Equipment for this tank

Salt, sand, heater, and light picks sized for a 6-gallon tank. All on Amazon — prices and stock change daily.

Affiliate links. As an Amazon Associate, reefcalcs earns from qualifying purchases.

FAQ

How many gallons is a 16 × 8 × 10 in tank?
A 16 × 8 × 10 in aquarium holds approximately 6 US gallons by outside dimensions (21.0 L). After subtracting a standard 0.375" glass thickness on each interior wall, the actual water capacity is about 4 US gallons. Manufacturers commonly market this as a "5-gallon" tank.
How much does a filled 16 × 8 × 10 in tank weigh?
A 16 × 8 × 10 in saltwater reef tank with ~4 lb of live rock and a 1" sand bed weighs about 71 lb (32 kg) filled. Freshwater with no rock comes in lighter, around 79 lb. Floor load is roughly 79 lb per square foot — most residential floors are rated for 40 lb/ft² live load, so confirm before placing upstairs.
What glass thickness do I need for a 16 × 8 × 10 in tank?
Using the Wisner hobby formula with a 3.8 safety factor, a 16 × 8 × 10 in tank needs at least 4 mm annealed (regular float) glass. Tempered glass can be 4 mm and still meet the same safety margin. This is the calculated minimum — most commercial tanks at this size ship with one step up for safety. See the glass thickness calculator for the full math.
What size heater for a 16 × 8 × 10 in tank?
For a tank in a warm room (~70 °F ambient), this size needs roughly 18 W of heating. For redundancy, run two heaters at 25 W each — heaters fail, and a single point of failure on tropical fish or coral is expensive.
How much sand or substrate for a 16 × 8 × 10 in tank?
A 2-inch sand bed in this footprint (16" × 8") needs approximately 13 lb of CaribSea Special Grade aragonite, or about 1 20-lb bags. For a deep sand bed at 4 inches, double that.
Is a 16 × 8 × 10 in tank good for a reef?
It can work as a reef, but the 16 × 8 × 10 in footprint is more commonly used for freshwater. Front-to-back depth under 18 inches limits aquascape options for SPS or LPS. Most reefers in this size range pick a wider, shallower alternative.

Last reviewed