Tank reference
70-gallon shallow cube
30 × 30 × 18 in
Key stats
Dimensions (L × W × H)
30 × 30 × 18 in
76 × 76 × 46 cm
Volume (raw, outside)
70 US gal
265.5 L · 16200 in³
Water volume (with glass inset)
64 US gal
241.8 L
Manufacturer nominal
70 gal
Matches calculated
Footprint
6.25 ft²
900 in²
Filled saltwater weight
777 lb
353 kg · 124 lb/ft² floor
Filled freshwater weight
668 lb
303 kg
Recommended glass (annealed)
10 mm
0.394 in · safety factor 3.8
Heater size (78°F target)
192 W
Redundant pair: 2× 100 W heaters
Substrate (2" sand bed)
89 lb
CaribSea Special Grade · 5 × 20-lb bags
How many gallons is a 30 × 30 × 18 in tank?
A 30 × 30 × 18 in aquarium contains 70 US gallons by outside dimensions. The math:
30 × 30 × 18 = 16200 in³ 16200 ÷ 231 in³/gal = 70.13 US gal 70.13 × 3.785 = 265.5 L
In practice, actual water capacity is 64 gallons after subtracting 0.375" of glass thickness on each side. Manufacturers typically market this as a 70-gallon tank for round-number simplicity.
For a different shape (cylinder, hex, bow-front) or to enter custom dimensions, use the full aquarium volume calculator.
How much does a filled 30 × 30 × 18 in tank weigh?
- Saltwater reef (with ~64 lb live rock + 1" sand bed): 777 lb (353 kg)
- Freshwater (with 20 lb gravel, no rock): 668 lb (303 kg)
- Empty glass only: approximately 103 lb
- Floor load: 124 lb/ft² (saltwater filled)
Floor-load warning: at 124 lb/ft², this tank exceeds the 40 lb/ft² typical residential live-load rating. Place over a load-bearing wall or get a structural assessment before installing upstairs.
Full breakdown including equipment, sump, and custom rock weight: aquarium weight calculator.
Glass thickness for a 30 × 30 × 18 in tank
Using the Wisner hobby formula with a 3.8 safety factor, this tank requires:
- Annealed (regular float) glass: 10 mm minimum (0.394")
- Tempered glass: 5 mm minimum (tempered is ~4× stronger than annealed)
Most commercial tanks at this size ship one thickness step up for additional safety. See the glass thickness calculator for the full formula and Starphire (low-iron) options.
Heater wattage for a 30 × 30 × 18 in tank
In a warm room (~70 °F ambient) targeting 78 °F, this size tank needs about 192 W of heating. The conservative reefkeeping practice is to run two heaters at 100 W each: if one fails stuck-on, the other isn't powerful enough to cook the tank alone; if one fails stuck-off, the remaining one slows the temperature drop while you replace it.
For cold-room or cool-basement adjustments: heater wattage calculator.
How much sand or gravel for a 30 × 30 × 18 in tank?
- 2" sand bed: ~89 lb of CaribSea Special Grade aragonite (5 × 20-lb bags)
- 4" deep sand bed (DSB): ~177 lb
- 1" shallow / aesthetic: ~44 lb
Other substrate brands (Nature's Ocean, Tahitian Moon, Eco-Complete): substrate calculator.
FAQ
- How many gallons is a 30 × 30 × 18 in tank?
- A 30 × 30 × 18 in aquarium holds approximately 70 US gallons by outside dimensions (265.5 L). After subtracting a standard 0.375" glass thickness on each interior wall, the actual water capacity is about 64 US gallons.
- How much does a filled 30 × 30 × 18 in tank weigh?
- A 30 × 30 × 18 in saltwater reef tank with ~64 lb of live rock and a 1" sand bed weighs about 777 lb (353 kg) filled. Freshwater with no rock comes in lighter, around 668 lb. Floor load is roughly 124 lb per square foot — most residential floors are rated for 40 lb/ft² live load, so confirm before placing upstairs.
- What glass thickness do I need for a 30 × 30 × 18 in tank?
- Using the Wisner hobby formula with a 3.8 safety factor, a 30 × 30 × 18 in tank needs at least 10 mm annealed (regular float) glass. Tempered glass can be 5 mm and still meet the same safety margin. This is the calculated minimum — most commercial tanks at this size ship with one step up for safety. See the glass thickness calculator for the full math.
- What size heater for a 30 × 30 × 18 in tank?
- For a tank in a warm room (~70 °F ambient), this size needs roughly 192 W of heating. For redundancy, run two heaters at 100 W each — heaters fail, and a single point of failure on tropical fish or coral is expensive.
- How much sand or substrate for a 30 × 30 × 18 in tank?
- A 2-inch sand bed in this footprint (30" × 30") needs approximately 89 lb of CaribSea Special Grade aragonite, or about 5 20-lb bags. For a deep sand bed at 4 inches, double that.
- Is a 30 × 30 × 18 in tank good for a reef?
- Yes — the 30 × 30 × 18 in footprint is well-suited to a reef tank. The width gives enough front-to-back depth for aquascaping. Tank height is shallow — easy on lighting but limits vertical aquascape.
Run your own numbers
Last reviewed