Tank reference
100-gallon shallow cube
36 × 36 × 18 in
Key stats
Dimensions (L × W × H)
36 × 36 × 18 in
91 × 91 × 46 cm
Volume (raw, outside)
101 US gal
382.3 L · 23328 in³
Water volume (with glass inset)
93 US gal
351.2 L
Manufacturer nominal
100 gal
Differs from raw — manufacturer rounds down for shipping
Footprint
9.00 ft²
1296 in²
Filled saltwater weight
1110 lb
503 kg · 123 lb/ft² floor
Filled freshwater weight
942 lb
427 kg
Recommended glass (annealed)
10 mm
0.394 in · safety factor 3.8
Heater size (78°F target)
279 W
Redundant pair: 2× 150 W heaters
Substrate (2" sand bed)
128 lb
CaribSea Special Grade · 7 × 20-lb bags
How many gallons is a 36 × 36 × 18 in tank?
A 36 × 36 × 18 in aquarium contains 101 US gallons by outside dimensions. The math:
36 × 36 × 18 = 23328 in³ 23328 ÷ 231 in³/gal = 100.99 US gal 100.99 × 3.785 = 382.3 L
In practice, actual water capacity is 93 gallons after subtracting 0.375" of glass thickness on each side. Manufacturers typically market this as a 100-gallon tank for round-number simplicity.
For a different shape (cylinder, hex, bow-front) or to enter custom dimensions, use the full aquarium volume calculator.
How much does a filled 36 × 36 × 18 in tank weigh?
- Saltwater reef (with ~93 lb live rock + 1" sand bed): 1110 lb (503 kg)
- Freshwater (with 20 lb gravel, no rock): 942 lb (427 kg)
- Empty glass only: approximately 131 lb
- Floor load: 123 lb/ft² (saltwater filled)
Floor-load warning: at 123 lb/ft², this tank exceeds the 40 lb/ft² typical residential live-load rating. Place over a load-bearing wall or get a structural assessment before installing upstairs.
Full breakdown including equipment, sump, and custom rock weight: aquarium weight calculator.
Glass thickness for a 36 × 36 × 18 in tank
Using the Wisner hobby formula with a 3.8 safety factor, this tank requires:
- Annealed (regular float) glass: 10 mm minimum (0.394")
- Tempered glass: 5 mm minimum (tempered is ~4× stronger than annealed)
Most commercial tanks at this size ship one thickness step up for additional safety. See the glass thickness calculator for the full formula and Starphire (low-iron) options.
Heater wattage for a 36 × 36 × 18 in tank
In a warm room (~70 °F ambient) targeting 78 °F, this size tank needs about 279 W of heating. The conservative reefkeeping practice is to run two heaters at 150 W each: if one fails stuck-on, the other isn't powerful enough to cook the tank alone; if one fails stuck-off, the remaining one slows the temperature drop while you replace it.
For cold-room or cool-basement adjustments: heater wattage calculator.
How much sand or gravel for a 36 × 36 × 18 in tank?
- 2" sand bed: ~128 lb of CaribSea Special Grade aragonite (7 × 20-lb bags)
- 4" deep sand bed (DSB): ~255 lb
- 1" shallow / aesthetic: ~64 lb
Other substrate brands (Nature's Ocean, Tahitian Moon, Eco-Complete): substrate calculator.
FAQ
- How many gallons is a 36 × 36 × 18 in tank?
- A 36 × 36 × 18 in aquarium holds approximately 101 US gallons by outside dimensions (382.3 L). After subtracting a standard 0.375" glass thickness on each interior wall, the actual water capacity is about 93 US gallons. Manufacturers commonly market this as a "100-gallon" tank.
- How much does a filled 36 × 36 × 18 in tank weigh?
- A 36 × 36 × 18 in saltwater reef tank with ~93 lb of live rock and a 1" sand bed weighs about 1110 lb (503 kg) filled. Freshwater with no rock comes in lighter, around 942 lb. Floor load is roughly 123 lb per square foot — most residential floors are rated for 40 lb/ft² live load, so confirm before placing upstairs.
- What glass thickness do I need for a 36 × 36 × 18 in tank?
- Using the Wisner hobby formula with a 3.8 safety factor, a 36 × 36 × 18 in tank needs at least 10 mm annealed (regular float) glass. Tempered glass can be 5 mm and still meet the same safety margin. This is the calculated minimum — most commercial tanks at this size ship with one step up for safety. See the glass thickness calculator for the full math.
- What size heater for a 36 × 36 × 18 in tank?
- For a tank in a warm room (~70 °F ambient), this size needs roughly 279 W of heating. For redundancy, run two heaters at 150 W each — heaters fail, and a single point of failure on tropical fish or coral is expensive.
- How much sand or substrate for a 36 × 36 × 18 in tank?
- A 2-inch sand bed in this footprint (36" × 36") needs approximately 128 lb of CaribSea Special Grade aragonite, or about 7 20-lb bags. For a deep sand bed at 4 inches, double that.
- Is a 36 × 36 × 18 in tank good for a reef?
- Yes — the 36 × 36 × 18 in footprint is well-suited to a reef tank. The width gives enough front-to-back depth for aquascaping. Tank height is shallow — easy on lighting but limits vertical aquascape.
Run your own numbers
Last reviewed