Tank reference

Red Sea Reefer 170

32 × 20 × 18 in

Key stats

Dimensions (L × W × H)

32 × 20 × 18 in

81 × 51 × 46 cm

Volume (raw, outside)

50 US gal

188.8 L · 11520 in³

Water volume (with glass inset)

45 US gal

170.1 L

Manufacturer nominal

43 gal

Differs from raw — manufacturer rounds down for shipping

Footprint

4.44 ft²

640 in²

Filled saltwater weight

559 lb

253 kg · 126 lb/ft² floor

Filled freshwater weight

487 lb

221 kg

Recommended glass (annealed)

10 mm

0.394 in · safety factor 3.8

Heater size (78°F target)

135 W

Redundant pair: 2× 75 W heaters

Substrate (2" sand bed)

63 lb

CaribSea Special Grade · 4 × 20-lb bags

How many gallons is a 32 × 20 × 18 in tank?

A 32 × 20 × 18 in aquarium contains 50 US gallons by outside dimensions. The math:

32 × 20 × 18 = 11520 in³
11520 ÷ 231 in³/gal = 49.87 US gal
49.87 × 3.785 = 188.8 L

In practice, actual water capacity is 45 gallons after subtracting 0.375" of glass thickness on each side. Manufacturers typically market this as a 43-gallon tank for round-number simplicity.

For a different shape (cylinder, hex, bow-front) or to enter custom dimensions, use the full aquarium volume calculator.

How much does a filled 32 × 20 × 18 in tank weigh?

  • Saltwater reef (with ~45 lb live rock + 1" sand bed): 559 lb (253 kg)
  • Freshwater (with 20 lb gravel, no rock): 487 lb (221 kg)
  • Empty glass only: approximately 84 lb
  • Floor load: 126 lb/ft² (saltwater filled)

Floor-load warning: at 126 lb/ft², this tank exceeds the 40 lb/ft² typical residential live-load rating. Place over a load-bearing wall or get a structural assessment before installing upstairs.

Full breakdown including equipment, sump, and custom rock weight: aquarium weight calculator.

Glass thickness for a 32 × 20 × 18 in tank

Using the Wisner hobby formula with a 3.8 safety factor, this tank requires:

  • Annealed (regular float) glass: 10 mm minimum (0.394")
  • Tempered glass: 5 mm minimum (tempered is ~4× stronger than annealed)

Most commercial tanks at this size ship one thickness step up for additional safety. See the glass thickness calculator for the full formula and Starphire (low-iron) options.

Heater wattage for a 32 × 20 × 18 in tank

In a warm room (~70 °F ambient) targeting 78 °F, this size tank needs about 135 W of heating. The conservative reefkeeping practice is to run two heaters at 75 W each: if one fails stuck-on, the other isn't powerful enough to cook the tank alone; if one fails stuck-off, the remaining one slows the temperature drop while you replace it.

For cold-room or cool-basement adjustments: heater wattage calculator.

How much sand or gravel for a 32 × 20 × 18 in tank?

  • 2" sand bed: ~63 lb of CaribSea Special Grade aragonite (4 × 20-lb bags)
  • 4" deep sand bed (DSB): ~126 lb
  • 1" shallow / aesthetic: ~32 lb

Other substrate brands (Nature's Ocean, Tahitian Moon, Eco-Complete): substrate calculator.

FAQ

How many gallons is a 32 × 20 × 18 in tank?
A 32 × 20 × 18 in aquarium holds approximately 50 US gallons by outside dimensions (188.8 L). After subtracting a standard 0.375" glass thickness on each interior wall, the actual water capacity is about 45 US gallons. Manufacturers commonly market this as a "43-gallon" tank.
How much does a filled 32 × 20 × 18 in tank weigh?
A 32 × 20 × 18 in saltwater reef tank with ~45 lb of live rock and a 1" sand bed weighs about 559 lb (253 kg) filled. Freshwater with no rock comes in lighter, around 487 lb. Floor load is roughly 126 lb per square foot — most residential floors are rated for 40 lb/ft² live load, so confirm before placing upstairs.
What glass thickness do I need for a 32 × 20 × 18 in tank?
Using the Wisner hobby formula with a 3.8 safety factor, a 32 × 20 × 18 in tank needs at least 10 mm annealed (regular float) glass. Tempered glass can be 5 mm and still meet the same safety margin. This is the calculated minimum — most commercial tanks at this size ship with one step up for safety. See the glass thickness calculator for the full math.
What size heater for a 32 × 20 × 18 in tank?
For a tank in a warm room (~70 °F ambient), this size needs roughly 135 W of heating. For redundancy, run two heaters at 75 W each — heaters fail, and a single point of failure on tropical fish or coral is expensive.
How much sand or substrate for a 32 × 20 × 18 in tank?
A 2-inch sand bed in this footprint (32" × 20") needs approximately 63 lb of CaribSea Special Grade aragonite, or about 4 20-lb bags. For a deep sand bed at 4 inches, double that.
Is a 32 × 20 × 18 in tank good for a reef?
Yes — the 32 × 20 × 18 in footprint is well-suited to a reef tank. The width gives enough front-to-back depth for aquascaping. Tank height is shallow — easy on lighting but limits vertical aquascape.

Last reviewed