Tank reference

Red Sea Reefer 250

36 × 22 × 21 in

Key stats

Dimensions (L × W × H)

36 × 22 × 21 in

91 × 56 × 53 cm

Volume (raw, outside)

72 US gal

272.6 L · 16632 in³

Water volume (with glass inset)

66 US gal

248.6 L

Manufacturer nominal

65 gal

Differs from raw — manufacturer rounds down for shipping

Footprint

5.50 ft²

792 in²

Filled saltwater weight

792 lb

359 kg · 144 lb/ft² floor

Filled freshwater weight

686 lb

311 kg

Recommended glass (annealed)

15 mm

0.591 in · safety factor 3.8

Heater size (78°F target)

197 W

Redundant pair: 2× 100 W heaters

Substrate (2" sand bed)

78 lb

CaribSea Special Grade · 4 × 20-lb bags

How many gallons is a 36 × 22 × 21 in tank?

A 36 × 22 × 21 in aquarium contains 72 US gallons by outside dimensions. The math:

36 × 22 × 21 = 16632 in³
16632 ÷ 231 in³/gal = 72.00 US gal
72.00 × 3.785 = 272.6 L

In practice, actual water capacity is 66 gallons after subtracting 0.375" of glass thickness on each side. Manufacturers typically market this as a 65-gallon tank for round-number simplicity.

For a different shape (cylinder, hex, bow-front) or to enter custom dimensions, use the full aquarium volume calculator.

How much does a filled 36 × 22 × 21 in tank weigh?

  • Saltwater reef (with ~66 lb live rock + 1" sand bed): 792 lb (359 kg)
  • Freshwater (with 20 lb gravel, no rock): 686 lb (311 kg)
  • Empty glass only: approximately 108 lb
  • Floor load: 144 lb/ft² (saltwater filled)

Floor-load warning: at 144 lb/ft², this tank exceeds the 40 lb/ft² typical residential live-load rating. Place over a load-bearing wall or get a structural assessment before installing upstairs.

Full breakdown including equipment, sump, and custom rock weight: aquarium weight calculator.

Glass thickness for a 36 × 22 × 21 in tank

Using the Wisner hobby formula with a 3.8 safety factor, this tank requires:

  • Annealed (regular float) glass: 15 mm minimum (0.591")
  • Tempered glass: 8 mm minimum (tempered is ~4× stronger than annealed)

Most commercial tanks at this size ship one thickness step up for additional safety. See the glass thickness calculator for the full formula and Starphire (low-iron) options.

Heater wattage for a 36 × 22 × 21 in tank

In a warm room (~70 °F ambient) targeting 78 °F, this size tank needs about 197 W of heating. The conservative reefkeeping practice is to run two heaters at 100 W each: if one fails stuck-on, the other isn't powerful enough to cook the tank alone; if one fails stuck-off, the remaining one slows the temperature drop while you replace it.

For cold-room or cool-basement adjustments: heater wattage calculator.

How much sand or gravel for a 36 × 22 × 21 in tank?

  • 2" sand bed: ~78 lb of CaribSea Special Grade aragonite (4 × 20-lb bags)
  • 4" deep sand bed (DSB): ~156 lb
  • 1" shallow / aesthetic: ~39 lb

Other substrate brands (Nature's Ocean, Tahitian Moon, Eco-Complete): substrate calculator.

FAQ

How many gallons is a 36 × 22 × 21 in tank?
A 36 × 22 × 21 in aquarium holds approximately 72 US gallons by outside dimensions (272.6 L). After subtracting a standard 0.375" glass thickness on each interior wall, the actual water capacity is about 66 US gallons. Manufacturers commonly market this as a "65-gallon" tank.
How much does a filled 36 × 22 × 21 in tank weigh?
A 36 × 22 × 21 in saltwater reef tank with ~66 lb of live rock and a 1" sand bed weighs about 792 lb (359 kg) filled. Freshwater with no rock comes in lighter, around 686 lb. Floor load is roughly 144 lb per square foot — most residential floors are rated for 40 lb/ft² live load, so confirm before placing upstairs.
What glass thickness do I need for a 36 × 22 × 21 in tank?
Using the Wisner hobby formula with a 3.8 safety factor, a 36 × 22 × 21 in tank needs at least 15 mm annealed (regular float) glass. Tempered glass can be 8 mm and still meet the same safety margin. This is the calculated minimum — most commercial tanks at this size ship with one step up for safety. See the glass thickness calculator for the full math.
What size heater for a 36 × 22 × 21 in tank?
For a tank in a warm room (~70 °F ambient), this size needs roughly 197 W of heating. For redundancy, run two heaters at 100 W each — heaters fail, and a single point of failure on tropical fish or coral is expensive.
How much sand or substrate for a 36 × 22 × 21 in tank?
A 2-inch sand bed in this footprint (36" × 22") needs approximately 78 lb of CaribSea Special Grade aragonite, or about 4 20-lb bags. For a deep sand bed at 4 inches, double that.
Is a 36 × 22 × 21 in tank good for a reef?
Yes — the 36 × 22 × 21 in footprint is well-suited to a reef tank. The width gives enough front-to-back depth for aquascaping. Height is in the SPS-friendly range for most fixtures.

Last reviewed