Tank reference
Waterbox Rimless 85.3
36 × 20 × 20 in
Key stats
Dimensions (L × W × H)
36 × 20 × 20 in
91 × 51 × 51 cm
Volume (raw, outside)
62 US gal
236.0 L · 14400 in³
Water volume (with glass inset)
57 US gal
214.1 L
Manufacturer nominal
85 gal
Differs from raw — manufacturer rounds down for shipping
Footprint
5.00 ft²
720 in²
Filled saltwater weight
691 lb
314 kg · 138 lb/ft² floor
Filled freshwater weight
600 lb
272 kg
Recommended glass (annealed)
12 mm
0.472 in · safety factor 3.8
Heater size (78°F target)
170 W
Redundant pair: 2× 100 W heaters
Substrate (2" sand bed)
71 lb
CaribSea Special Grade · 4 × 20-lb bags
How many gallons is a 36 × 20 × 20 in tank?
A 36 × 20 × 20 in aquarium contains 62 US gallons by outside dimensions. The math:
36 × 20 × 20 = 14400 in³ 14400 ÷ 231 in³/gal = 62.34 US gal 62.34 × 3.785 = 236.0 L
In practice, actual water capacity is 57 gallons after subtracting 0.375" of glass thickness on each side. Manufacturers typically market this as a 85-gallon tank for round-number simplicity.
For a different shape (cylinder, hex, bow-front) or to enter custom dimensions, use the full aquarium volume calculator.
How much does a filled 36 × 20 × 20 in tank weigh?
- Saltwater reef (with ~57 lb live rock + 1" sand bed): 691 lb (314 kg)
- Freshwater (with 20 lb gravel, no rock): 600 lb (272 kg)
- Empty glass only: approximately 99 lb
- Floor load: 138 lb/ft² (saltwater filled)
Floor-load warning: at 138 lb/ft², this tank exceeds the 40 lb/ft² typical residential live-load rating. Place over a load-bearing wall or get a structural assessment before installing upstairs.
Full breakdown including equipment, sump, and custom rock weight: aquarium weight calculator.
Glass thickness for a 36 × 20 × 20 in tank
Using the Wisner hobby formula with a 3.8 safety factor, this tank requires:
- Annealed (regular float) glass: 12 mm minimum (0.472")
- Tempered glass: 6 mm minimum (tempered is ~4× stronger than annealed)
Most commercial tanks at this size ship one thickness step up for additional safety. See the glass thickness calculator for the full formula and Starphire (low-iron) options.
Heater wattage for a 36 × 20 × 20 in tank
In a warm room (~70 °F ambient) targeting 78 °F, this size tank needs about 170 W of heating. The conservative reefkeeping practice is to run two heaters at 100 W each: if one fails stuck-on, the other isn't powerful enough to cook the tank alone; if one fails stuck-off, the remaining one slows the temperature drop while you replace it.
For cold-room or cool-basement adjustments: heater wattage calculator.
How much sand or gravel for a 36 × 20 × 20 in tank?
- 2" sand bed: ~71 lb of CaribSea Special Grade aragonite (4 × 20-lb bags)
- 4" deep sand bed (DSB): ~142 lb
- 1" shallow / aesthetic: ~35 lb
Other substrate brands (Nature's Ocean, Tahitian Moon, Eco-Complete): substrate calculator.
FAQ
- How many gallons is a 36 × 20 × 20 in tank?
- A 36 × 20 × 20 in aquarium holds approximately 62 US gallons by outside dimensions (236.0 L). After subtracting a standard 0.375" glass thickness on each interior wall, the actual water capacity is about 57 US gallons. Manufacturers commonly market this as a "85-gallon" tank.
- How much does a filled 36 × 20 × 20 in tank weigh?
- A 36 × 20 × 20 in saltwater reef tank with ~57 lb of live rock and a 1" sand bed weighs about 691 lb (314 kg) filled. Freshwater with no rock comes in lighter, around 600 lb. Floor load is roughly 138 lb per square foot — most residential floors are rated for 40 lb/ft² live load, so confirm before placing upstairs.
- What glass thickness do I need for a 36 × 20 × 20 in tank?
- Using the Wisner hobby formula with a 3.8 safety factor, a 36 × 20 × 20 in tank needs at least 12 mm annealed (regular float) glass. Tempered glass can be 6 mm and still meet the same safety margin. This is the calculated minimum — most commercial tanks at this size ship with one step up for safety. See the glass thickness calculator for the full math.
- What size heater for a 36 × 20 × 20 in tank?
- For a tank in a warm room (~70 °F ambient), this size needs roughly 170 W of heating. For redundancy, run two heaters at 100 W each — heaters fail, and a single point of failure on tropical fish or coral is expensive.
- How much sand or substrate for a 36 × 20 × 20 in tank?
- A 2-inch sand bed in this footprint (36" × 20") needs approximately 71 lb of CaribSea Special Grade aragonite, or about 4 20-lb bags. For a deep sand bed at 4 inches, double that.
- Is a 36 × 20 × 20 in tank good for a reef?
- Yes — the 36 × 20 × 20 in footprint is well-suited to a reef tank. The width gives enough front-to-back depth for aquascaping. Height is in the SPS-friendly range for most fixtures.
Run your own numbers
Last reviewed